ZyXEL Communications XS3700 Series - Link Aggregation ID; Link Aggregation Status

Chapter 15 Link Aggregation
XS3700 Series User’s Guide
141
Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing network
topology loops.
15.2.1 Link Aggregation ID
LACP aggregation ID consists of the following information
1
:
15.3 Link Aggregation Status
Click Advanced Application > Link Aggregation in the navigation panel. The Link Aggregation
Status screen displays by default. See Section 15.1 on page 140 for more information.
Figure 87 Advanced Application > Link Aggregation Status
Table 64 Link Aggregation ID: Local Switch
SYSTEM
PRIORITY
MAC ADDRESS KEY PORT PRIORITY PORT NUMBER
0000 00-00-00-00-00-00 0000 00 0000
Table 65 Link Aggregation ID: Peer Switch
SYSTEM
PRIORITY
MAC ADDRESS KEY PORT PRIORITY PORT NUMBER
0000 00-00-00-00-00-00 0000 00 0000
1. Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.