XS3700 Series User’s Guide
35
CHAPTER 4
The Web Configurator
This section introduces the configuration and functions of the web configurator.
4.1 Introduction
The web configurator is an HTML-based management interface that allows easy Switch setup and
management via Internet browser. Use one of the following browser versions:
•IE 8 or later
• Chrome 34.0.1847.131 or later
• Firefox 29.0.1 or later
•Opera 21.0 or later
• Safari 5.1.7 or later
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
4.2 System Login
1 Start your web browser.
2 Type “http://” and the IP address of the Switch (for example, the default management IP address is
192.168.1.1 through an in-band (non-MGMT) port and 192.168.0.1 through the MGMT port) in the
Location or Address field. Press [ENTER].
3 The login screen appears. The default username is admin and associated default password is
1234. The date and time display as shown if you have not configured a time server nor manually
entered a time and date in the General Setup screen.
To Next Page
Loading...
