Chapter 23 Multicast
XS3700 Series User’s Guide
202
Figure 127 MVR Multicast Television Example
23.6 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for
each multicast VLAN. Click Advanced Application > Multicast > Multicast Setup > MVR to
display the screen as shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the
Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
To Next Page
Loading...
