Chapter 5 Connection Status Screens
VMG/XMG Series User’s Guide
113
Figure 67 Guest WiFi Settings: Configuration
To assign different SSIDs to the 2.4 GHz and 5 GHz guest wireless networks, clear the Keep 2.4G and 5G
the same check box in the WiFi Settings screen, and the Guest WiFi Settings screen will change. Note
that you have to disable Zyxel MESH in the Network > Wireless > MESH screen to clear the Keep 2.4G and
5G the same check box.
Figure 68 Guest WiFi Settings: Different SSIDs
Each field is described in the following table.
Table 24 WiFi Settings: Configuration
LABEL DESCRIPTION
WiFi
2.4G/5G WiFi
Click this switch to enable or disable the 2.4 GHz and/or 5 GHz wireless networks. When the
switch goes to the right , the function is enabled. Otherwise, it’s not.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
To Next Page
Loading...
