4) Select Type of Virtual Address Mapping Rule “Many-to-One”.
5) Click button “Port Forwarding Rules”, then click help page.
6) There is not the help page.
2. [BUG FIX]
Symptom: Some information on eWc/Home page is different from ZW5 4.01
Condition:
1) There is on MAC address on System Information. They are moved to
Interfaces and add DMZ/WLAN/WAN MAC address on eWC/Home.
2) Home/System Information/Firmware Version can’t link to maintenance/F/W
Upload Page.
3) Home/Security services/Content Filter Expiration can’t link to
Registration/Service page.
4) Home/Up Time clock is not real-time.
Modifications in V 4.01(XU.0)b3 | 09/23/2006
1. [BUG FIX]
Symptom: LAN DHCP pool size is 128
Condition:
LAN DHCP pool size is 128, it should be 32 according to PS.
2. [BUG FIX]
Symptom: Default romfile is incorrect for DMZ and WLAN in BW
MGMT>>Class Setup page.
Condition:
1) Click BW MGMT->Class Setup page.
2) Select DMZ or WLAN interface.
3) It displays the “Root Class: 0 kbps” in the middle of this page, it is incorrect
and should be “Root Class: 100000 kbps”.
3. [BUG FIX]
Symptom: There are two error title “ZyWALLZyWALLZyWALLLAN” on help
page.
Condition:
1) eWC->NETWORK->LAN->HELP page
2) Help page displays incorrect title “ZyWALLZyWALLZyWALLLAN” instead
of “LAN”.
4. [BUG FIX]
Symptom: Default setting is inconsistent with ZW5
Condition:
1) eWC/Firewall/Threshold/TCP Maximum Incomplete.
ZW2+: 10 ZW5: 30
2) eWC/NAT/Max.Concurrent Sessions Per Host:
ZW2+: 2048 ZW5: 3000.
3) ZW5 has not the following items on eWC/WAN/Dial Backup page
Remote IP Subnet Mask
Remote Node IP Address
4) eWC/MAINTENANCE/Time and Date/Time Server Address
ZW2+: a.ntp.alphazed.net ZW5: 0.pool.ntp.org.
5) eWC/Firewall/Default Rule:
Default firewall rule LAN to DMZ should be no log.
Default firewall rule WAN to DMZ should be no log.
To Next Page
Loading...
