ENGLISH
16
9 Anti-Spam Setup
Use anti-spam to have the ZyWALL check for unsolicited commercial or junk e-mail (spam).
Note: You must have already subscribed to the anti-spam service to use the feature (see page 6).
1 Click the Wizard icon in the HOME screen and then Anti-Spam Setup to open the anti-spam wizard.
2 Select the locations where you
have e-mail servers. An icon of an
e-mail server appears at each spot
you select. In this example the e-
mail servers are on the LAN.
3 The ZyWALL recommends which
traffic flows to scan for spam based
on the locations of your e-mail
servers.
To Next Page
Loading...
