ZyXEL Communications ZYWALL 35 - Page 168

ZyWALL 35 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
168
12. On Gateway Policy Information, you should choose ToNetScreen IKE policy for your IPSec rule.
13. On Local Network, choose Subnet Address for your Address Type. Starting IP Address and
Ending IP Address/Subnet are your local site LAN IP addresses. In this example, you should
type 192.168.2.0 on Starting IP Address field and then type 255.255.255.0 on Ending IP
Address/Subnet field.
14. On Remote Network, choose Subnet Address for your Address Type. Starting IP Address and
Ending IP Address/Subnet are your remote site LAN IP addresses. In this example, you should
type 192.168.1.0 on Starting IP Address field and then type 255.255.255.0 on Ending IP
Address/Subnet field.