ZyWALL 35 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
175
14. Give a name for your policy, for example “ZyWALL & NetScreen”.
15. On Source Address, you should set up Local LAN IP addresses. In this example, select New
Address option, and type 192.168.1.0 / 255.255.255.0 on the text box. On Destination Address, you
should set up remote IP addresses. In this example, select New Address option, and type 192.168.2.0
/ 255.255.255.0 on the text box.
16. Select Action to Tunnel, and select ToZyWALLIPSecVPN rule. Check Modify matching
bidirectional VPN policy check box, it means that you can create/modify the VPN policy for the
opposite direction. Then, press OK button to save your settings.
To Next Page
Loading...
