ZyWALL 35 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
64
Step1.
Activate Bandwidth Management on the interface on which you want to control. In this example, it is
LAN. Assign 2048Kbps to LAN interface.
Step2. Go to “Class Setup” and select LAN from the drop-down list of Interface. Click on Root Class and
then click on “Add Sub-Class” to create and add a new class under root.
We add a service and allocate 400kbps for FTP and destined to FTP Client A. Select the Service as FTP
from drop-down list. Input Client A’s IP address as Destination IP Address.
To Next Page
Loading...
