ZyWALL 5 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
142
6. On Security Level settings, you could set up phase 1 IKE rules. In this example, select User Defined,
and choose pre-g1-des-md5 rule. The pre-g1-des-md5 means Pre-Share Key, group1, DES for
Encryption Algorithm and MD5 for Authentication Algorithm. Select Main (ID Protection) option for
Mode (Initiator). Then, press Return button, and press OK button on next page to save your settings.
7. When you finished doing the settings, you will see an IKE rule on the page.
To Next Page
Loading...
