ZyWALL 5 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
38
Step1.
Activate Bandwidth Management on the interface on which you want to control. In this example, it is
WAN1. Assign the bandwidth of the ADSL upstream because Bandwidth Management only manages
traffic that “flow out” the router’s interface.
Step2. Go to “Class Setup”. Click on Root Class and then click on “Add Sub-Class” to create and add a
new class under root.
We add a service and allocate 100kbps for FTP. Select the Service as FTP from drop-down list. Specify
To Next Page
Loading...
