ZyWALL 5 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
42
Step2. Go to “Class Setup” and add a new class under root. We add a service and allocate 100kbps for
FTP. Select the Service as FTP from drop-down list. Specify FTP server’s IP address as Source IP address.
Enable “Borrow bandwidth from parent class”
Step3. Add another class, Medial. In this case the server IP address is 192.168.1.10 and it uses UDP for
streaming. We allocate 300kbps for Media. Select the Service as Custom and assign Protocol ID to 17 for
UDP.
To Next Page
Loading...
