ZyXEL Communications ZYWALL USG 20W - Page 8

ZyXEL – ZyWALL USG Support Notes
All contents copyright (c) 2010 ZyXEL Communications Corporation.
8
Step 6. To check the PPPoE IP address, click the PPPoE rule and check the IP
address part for the information.
Step 7. Click CONFIGURATION > Network > Interface > Cellular to open the
configuration page.
Step 6. Fill in the 3G connection parameters:
- The card information will be detected by device automatically
- Internet Access setting
 Access Point Name (APN)
 PIN code
 Phone number (enter *99# if not sure what number to fill in)