2N EntryCom - Arrival;Departure, Day;Night Modes

41
11.2. Arrival/Departure, Day/Night Modes
EntryCom can identify easily where to “route” (switch) a call after a button is pressed.
All you have to do is call EntryCom and enter the following:
I‘m leaving: password
I‘m back: password
All buttons can be switched all at once by a common Day/Night password or
individually by separate Departure/Arrival passwords.
How does switching work?
• Every button has memories for 6 numbers (intended primarily for Automatic Multiple
Number Dialling).
• If the Automatic Multiple Number Dialling mode is OFF, memory 1 is used for the Day
mode and memory 3 for the Night mode. This is a simple two-number switching.
• If the Automatic Multiple Number Dialling mode is ON, memories 1, 2, 3, 4, 5, 6 are
used for the Day mode and memories 3, 4, 5, 6 are used for the Night mode in the
above-mentioned order. This accelerates the process; numbers that would not be
answered are skipped over.
• If the Night mode is on and memories 3 to 6 are empty, memories 1 and 2 are used.
• If the Night mode is on, memories 1 and 2 are omitted for all buttons and this
cannot be disabled individually using the Arrival function.
• In the Day mode, the buttons assigned to persons who used the Departure function
(are on a leave) shall remain in the Night mode until the same persons use the
Arrival function (after the leave, e.g.).
Example 1 – administration building, automatic dialling is off:
Button 01: labelled Mr. Smith, memory 1 = Mr. Smith‘s line, memory 3 – secretary‘s
line, password for button 01 is 777.
1. Mr. Smith is leaving for holiday. He calls EntryCom and enters: 777 1 .
2. A visitor comes, presses Mr. Smith‘s button – EntryCom
calls the secretary.
3. Mr. Smith comes back. He calls EntryCom and enters:
777 0.
Example 2 – family house, Silent Automatic Multiple Number Dialling:
Button 01: labelled The Johnsons, memory 1 = living room, 2 = workshop, 3 = Mr.
Johnson’s mobile telephone, 4 = Mrs. Johnson‘s mobile telephone.
Arrival/Departure password for button 01 is 333.
1. The family is leaving for holiday. They call EntryCom and enter: 333 1 .
2. A visitor presses the Johnson’s’ button – EntryCom calls Mr. Johnson‘s mobile
phone and, if unsuccessful, Mrs. Johnson‘s mobile phone.
3. Etc.