2N IP Force 9151101CHW - Page 110

Installation manual 2N® IP Force

110 / 118
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MJPEG
Low quality: QVGA (320 x 240), 10 fps, quality 70:435 kbps with headers
Medium quality: VGA (640 x 480), 15 fps, quality 85: 506 kbps
High quality: SXGA (1280 x 960), 15 fps, quality 95: 8 Mbps
Interface
Power supply:12V ±15% / 2A DC or PoE
PoE:PoE 802.3af (Class 0–12.95W)
LAN:10/100BASE-TX s Auto-MDIX, RJ-45
Recommended cabling:Cat-5e or higher
Supported protocols:SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog, ONVIF
Passive relay switch:NO and NC contacts, up to 30V / 1A AC/DC
Active switch output:9 up to 13 V DCdepending on power supply (PoE: 9 V; adaptor: power supply voltage
minus 1V), max 600mA
RFID card reader
Optional
Includes besides card reader itself: Wiegand interface, tamper switch, active output, relay, two inputs
Supported cards on 125kHz version, Part No. 9151011
EM4100, EM4102
Supported cards on 13.56 MHz version, Part No. 9151016(only card serial number is read)
ISO/IEC 14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight,Ultralight C
ISO/IEC 14443B
CEPAS, HID iCLASS
JIS X 6319
Felica
Supported cards on 13.56 MHz NFC version, Part No. 9151017(only card serial number is read)
ISO/IEC 14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight,Ultralight C
ISO/IEC 14443B
CEPAS, HID iCLASS
JIS X 6319
Felica
ISO/IEC 18092
SmartPhone with NFC/HCE support, since Android version 4.3
Supported cards on secured 13.56 MHz NFC version, Part No. 9151019(optionally card serial number or
PAC ID is read)
ISO/IEC 14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight,Ultralight C
ISO/IEC 14443B
CEPAS, HID iCLASS
JIS X 6319
Felica
ISO/IEC 18092
SmartPhone with NFC/HCE support, since Android version 4.3
Wiegand Interface:Input/Output mode, located on RFID card reader module
Active switch output:9 up to 13 V DCdepending on power supply (PoE: 9 V; adaptor: power supply voltage
minus 1V), max 600mA
Passive relay switch:NO and NC contacts, up to 30V / 1A AC/DC
Additional switch