2N IP Force 9151101CHW - Page 23

Installation manual 2N® IP Force

23 / 118
•
•
•
•
•
•
•
•
Additional Modules
2N Part No.9151010
Axis Part No. 01350-001
Additional switch
Including:
relay switch – 30 V / 1 A NO/NC contact
active 12 V / 600 mA output
digital input
tamper switch for 2N
®
IP Force front panel opening
signalling
2N Part No.9151011
Axis Part No. 01344-001
Internal RFID card reader 125 kHz for installation in 2N
®
IP Force
intercoms. Allows the use of EM4xxx cards. Another two switches,
two logical inputs and a Wiegand interface are available. It is
compatible with the2N
®
IP Forcetwo-button and pictogram
models.
Includes a tamper switch to signal when the front panel is
opened.