2N IP Force 9151101CHW - Page 28

Installation manual 2N® IP Force

28 / 118
•
•
•
•
•
•
•
•
2N Part No. 9159052
Axis Part No. 01393-001
Power supply for2N
®
Induction Loop
External power supply for the induction loop
Input 230 V AC
Output 12 V DC
2N Part No.9134174
Axis Part No. 01385-001
Mifare Classic 1k RFID fob, 13.56 MHz
2N Part No. 9159014EU/
UK
2N Part No. 9159014US
Axis Part No. 01404-001
2N
®
2Wire
(set of 2 adaptors and power source for EU/US/UK)
The2N
®
2Wireconverter allows you to use the existing wiring (2
wires) from your original doorbell or door intercom to connect
any IP device. You do not have to configure anything; all you need
is a 2N
®
2Wireunit at each end of the cable and a power source
connected to at least one of these units.
The2N
®
2Wireunit then providesPoEpower not only to the
second converter, but also to all the other connected IP end
devices.