2N VoiceBlue Next - Page 53

532N TELEKOMUNIKACE a.s., www.2n.cz
®
Note
Check the GSM/UMTS searching priorities on the SIM card using
your mobile phone before enabling roaming.
Caution
Calls via a roaming network may increase you telephone bill!
CLIR – fill in this parameter to define whether or not the called subscriber should
be displayed the calling SIM card telephone number. It is recommended that the
telephone number of the SIM card inserted in the GSM module should not be
displayed to the called subscriber to avoid problems with CallBack from GSM.
Caution
The and enable servicesTemporary CLIP Temporary CLIR
must be supported by the GSM/UMTS provider. If not, not, the
provider's network may reject the call!
Maximum count of called minutes – set the maximum count of minutes to be
used via the SIM card per month.
Count of SMS messages – set the maximum count of SMS messages to be sent
via the SIM card per month.
Day to restore call limit and delete statistics – set the day in a month on which
the statistics of the a Maximum count of called minutes Count of SMS
parameters should be deletedmessages .
First count – set the length of the first pulse after which the pulse counting will
be changed as set in the parameterNext count .
Next count – set the length of one pulse in seconds after the time as defined in
the parameter elapsesFirst count .
Note
A correct setting of the and parametersFirst count Next count
guarantees a correct counting of remaining minutes on SIM
cards. These parameters help limit outgoing calls according to
free minutes. The CDR includes real data.
Day limit of called minutes – set the maximum count of minutes to be called via
the SIM card per day.
Time limits
Define the SIM card use time limits for the GSM group.
use this function to assign up to four independent free minute countersCall tariffs –
to each GSM module (SIM card) group:
free minutes for calls to own GSM/UMTS network;Tariff 1 =
free minutes for calls to other GSM/UMTS networks;Tariff 2 =
free minutes for calls to the PSTN;Tariff 3 =
free minutes for calls within a closed user group (VPN).Tariff 4 =
Set the LCR table (assign prefixes to tariffs) correctly to ensure full functionality of this
feature. If routing to a specific tariff is not applied in the LCR table, global free minutes
will be used.
Free minutes Count of free minutes for a specific tariff offered by the provider.