582N TELEKOMUNIKACE a.s., www.2n.cz
®
Note
Remember to activate the CallBack mode in the GSM incoming
window for a proper CallBack function.groups
The maximum count of CLIP routing table records is 96.
Mobility Extension
The table registers the Mobility Extension users.
Name – enter the user name for calling to VoIP.
User – enter the registration user name for VoIP.
Password – enter the registration user password for VoIP.
GSM number (CLIP) – enter the user SIM card CLIP.
Follow me function – enable/disable call forwarding to a mobile user station
(based on CLIP).
SMS at no answer function – enable/disable sending of information SMS on
missed calls.
Note
You are recommended to read the Mobility Extension section on
page carefully before using the Mobility Extension function.
Ethernet configuration
This window helps you configure the Ethernet interface of your gateway.
Use DHCP – enable/disable the DHCP client function in .2N VoiceBlue Next
®
IP address – the fixed IP address (v4) of the Ethernet2N VoiceBlue Next
®
interface.
Subnet mask – the subnet mask for the Ethernet2N VoiceBlue Next
®
interface.
Default gateway – The IP gateway IP address (v4) in the Ethernet network.
– primary DNS server.DNS server1
– secondary DNS server. Used as a back-up when DNS server 1 isDNS server2
not functional.
Caution
Incorrect settings, e.g. enabling the service, mayDHCP client
result in a denial of access to the 2N VoiceBlue Next
®
configuration. To avoid this, restore the GSM gateway default
settings. Refer to for details.Subs. 3.1
Tip
In case the gateway is in the DHCP client mode, current
assignments obtained from the DHCP server are displayed in
the , and items.IP address Subnet mask Default gateway
To Next Page
Loading...
