Need help?Do you have a question about the 2N EasyGate and is the answer not in the manual?
General| Device type | Cellular network gateway |
|---|---|
| Market positioning | Business |
| Data network | GPRS, GSM |
| GSM bands supported | 850, 900, 1800, 1900 MHz |
| GPRS multislot class | 10 |
| Input voltage | 12 V |
| Operating temperature (T-T) | 0 - 45 °C |
Weight and Dimensions| Dimensions (WxDxH) | 170 x 130 x 45 mm |
|---|
The primary purpose of EasyGate is to transmit voice between a GSM network and an attached FXO-interface terminal.
Provides guidance on optimal placement and environmental considerations for EasyGate installation.
Details how to connect the external antenna to the EasyGate device.
Explains the process of inserting the SIM card into the EasyGate.
Covers connecting the EasyGate to a PBX or a standard telephone set.
Details the correct way to connect the power supply to the EasyGate.
Guides on how to connect the EasyGate to a PC via a serial cable.
Covers installing and using PCManager for programming and monitoring EasyGate.
To Next Page
