Servers
– the addressee's primary IP address and transport port forFirst SNMP server
SNMP traps (default port = 162). Please make sure that the parameters have
been completed correctly to avoid SNMP malfunction.
– the addressee's secondary IP address and transportSecond SNMP server
port for SNMP traps (default port = 162). If these parameters are correctly
completed, the SNMP traps will be sent both to the primary and secondary IP
addresses.
Download MIB files
This section helps you download the MIB files that are necessary for a proper function
of your MIB browser.
Caution
The SNMP service works properly on condition that
SNMP is licensed in the section.Management
The primary IP address, transport port and community
parameters are completed.
SNMP is enabled in the section.eMonitoring
To Next Page
Loading...
