2N VoiceBlue Next - Page 82

822N TELEKOMUNIKACE a.s., www.2n.cz
®
Basic Commands
System Information
ATI3 Firmware version and copyright
ATI4 Factory number
Statistics
AT&T Statistics of calls via PRI interface
AT&TIN Statistics of incoming calls via GSM modules
AT&TOUT Statistics of outgoing calls via GSM modules
AT&T##
Statistics of calls via SIM cards of GSM module
##
AT%TPR=mi,ci,mo,co Setting of statistics via PRI
AT%TG0=mi,ci,0,0
Setting of statistics of incoming calls via all GSM
modules in GSM group 0
AT%TG#=mi,co,ri,ro Settings of statistics of GSM group #
AT%TGALL=mo.co,ri,ro Settings of statistics of all GSM groups
AT%T##=#,mi,ci,si,mo,co,so
Settings of statistics of SIM card # of GSM
module ##
AT%T##=ALL,mi,ci,si,mo,co,so
Settings of statistics of all SIM cards of GSM
module ##
AT%TALL=ALL,mi,ci,si,mo,co,so
Settings of statistics of all SIM cards of all GSM
modules
Description of parameters:
Mi/mo > Minutes of incom./outg. callsCi/co >
number of connected incom./outg. callsRi/ro >
number of re–routed incom/outg. calls in
groupSi/so > number of received/sent SMS
messages
! When you change these
parameters, all the other
counters will be reset!!
Wireless Engines
AT&Q## Received GSM signal level (##=00–15)
AT&QALL Received GSM signal level from all GSM modules
AT&Gxx=atcmd
Send command for AT commands directly to
GSM module
AT&Gxx=at+cnum – SIM card telephone
number
AT&Gxx=at+cpin="xxxx" – PIN entering
AT&Gxx=at+clck="sc",1"xxxx" – PIN request
enable
AT&Gxx=at+clck="sc",0"xxxx" – PIN request
disable