System Control
AT&BSYS=RESET Reset of PRIGW
AT&Gxx=RESET Reset of GSM module xx
AT&Gxx=BLOCK Block of GSM module xx
AT&Gxx=DOWN Transfer of GSM module into the sleep mode
AT&Gxx=ON Transfer of GSM module into the idle mode
Basic GSM Settings
AT%G00=rr,gggggg,gggggg,
gggggg,gggggg,gggggg
g,r=Number of GSM group for each GSM module
AT%G01=mode,atms,atfs
Voice processing settings (for GM22 GSM
modules only)
mode – algorithm (0–none, 1–semiduplex,
2–fullduplex)atms,atfs – transit, receive gain
(3=+5dB, 1=+2.5dB, 0=0dB, 2=–2.5dB,
4=–5dB
AT%G02=mode,atms,atfs
Voice processing settings (for TC35 GSM
modules only)
mode – algorithm (2–echo canceller)atms,atfs –
transit, receive gain (3=+5dBm, 1=+2.5dB,
0=0dB, 2=–2.5dB, 4=–5dB
AT%G06=mmdd,…mmdd…
List of holiday days (mm–month;dd–day), max
length of line is 63 chars!
AT%G07=mmdd,…mmdd Net list of holiday days
AT%G08=delay,min,max,tout
Parameters of dialling from ISDN to GSMdelay–
relax delay between callsmin – minimum length
of number dialled from ISDNmax – maximum
length of number dialled from ISDNtout – delay
between dialled digits
GSM Settings (X–GSM
Group)
AT%G#0=sim
Mode of switching SIM card
sim=0: 0 – OFF – group is turned-off
sim>0: 1-4 – SIM card 1-4; 5 – switching by
time; 6 – switching at random time
AT%G#1=netid,clir,min,sms,
sec,sec2,pseudo
Basic parameters of SIM card in slot 1
netid–network number
clir – 0=default,1=enabled,2=disabledmin –
maximum number of minutes called sms –
maximum number of SMS sent sec – minimum
call length (not for cdr info)sec2 – accuracy of
call length measurement (not for cdr info)pseudo
– default = 0
AT%G#2=netid,clir,min,sms,
sec,sec2,pseudo
Basic parameters of SIM card in slot 2
List of Networks
To Next Page
Loading...
