Command Shell Statuses
Command Shell
Name Description
IDLE Rest status, awaiting AT commands
REQUEST Communication with GSM module upon AT&G command is displayed
REPORT Active tracing
LOGFILE Content of log file is being written out
CALLFILE Content of call file is being written out
CALLREAD Call file records are read
AUTOFILE Content of incoming call auto routing chart is being written out
QUERY (not used so far)
SCREEN (not used so far)
MATRIX Active matrix screensaver
FUNCFILE Content of debug file is being written out
LCRFILE (not used so far)
Telnet Layer
Name Description
LOGOUT User logged-out
LOGIN User is entering name
PASSW User is entering password
IDLE User logged-in
Records of Events and Calls
Record Type in Log File
Name Description
POWER System power on, power off or reset
INIT Initialisation of EEPROM (configuration) or Flash (upgrade)
HW–ERR HW error of plugged-in board
SYSERR System error (memory error, etc.)
G2–ERR GSM module layer 2 error (gate2)
G3–ERR GSM module layer 3 error (gate3)
C4–ERR Link layer error (call4)
To Next Page
Loading...
