Predator Installation Manual Ver 2.9 Page 24
© 360 Vision Technology Ltd.
Thermal
• Gain Mode - Options are Automatic (default), Low Gain and High Gain.
• Gain Control Mode - Options are Histogram (default), Linear and Auto Bright.
• Intensity Transform - Options are White Hot (default), Black Hot, Fusion, Rainbow, Glowbow, Ironbow
1, Ironbow 2, Sepia, Colour 1, Colour 2, Ice and Fire and Rain.
• Dual Addressing - Used when a thermal camera is tted, using this option will allow the camera
receiver to accept telemetry commands for the address of the camera (set using Predator Utility) plus
1. i.e. Camera address 10 and 11. This will allow the thermal camera to be operated on the system
as camera 11.
Text Field Menu
Navigate along alpha-numeric characters and use zoom in to select. Choose text position by inputting x and y
co-ordinates. Set text display to on, if required.
Servicing
• Power Reset - This will reboot the camera, no settings will be lost.
• Factory Reset - This will reboot the camera and all the settings will be lost.
• Predator Software Version - This shows the software version of the camera.
Privacy Zone Menu
Can be used to obscure a scene within an image e.g. private residence. Move the camera to the position
required for the privacy zone before going into the camera OSD. You cannot manually move the camera once
in the OSD. Use the zoom to set the size of the privacy zone. Privacy zone will cover the whole scene viewed
when set.
• Dene Privacy Zone - Used to set a privacy zone.
• Seek Privacy Zone - Used to seek a privacy zone.
• Remove Privacy Zone - Used to remove a privacy zone.
Preset Mapping
Use this option to re-map a function to a preset.
Options are:-
• none
• auto focus on
• auto iris on
• ir on
• wiper on
• white light
• fast shutter
• WDR
• ambient
• 20% lamp intensity
• 40% lamp intensity
• 60% lamp intensity
• 80% lamp intensity
• 100% lamp intensity
• video switch
• white day
• ir-mono
• mono
• normal night
• washer on
• washer o
To Next Page
Loading...