Need help?Do you have a question about the 3Com 3226 and is the answer not in the manual?
Instructions for mounting the Switch in a standard 19-inch equipment rack.
Describes the procedure for powering up the Switch and initial checks.
Information on using SFP transceivers for fiber optic connections.
Provides an overview of the initial setup process for Switch management.
Explains methods for allocating IP information to the Switch.
Steps required to prepare the Switch for management after initial setup.
Detailed steps for manually configuring IP settings via the console port.
Overview of the different methods to manage the Switch.
Procedures for configuring CLI management.
Procedures for configuring Web interface management.
Procedures for configuring SNMP management for the Switch.
Guidance on diagnosing issues based on Switch LED status.
Troubleshooting steps for hardware-related issues with the Switch.
Steps to resolve issues related to network communication with the Switch.
Troubleshooting common issues encountered during software upgrades.
General safety precautions for installation, removal, and maintenance of the unit.
To Next Page
General