Need help?Do you have a question about the 3Com 3CRWX120695A and is the answer not in the manual?
General| Model | 3CRWX120695A |
|---|---|
| Power over Ethernet (PoE) | No |
| Manageable | Yes |
| VLAN Support | Yes |
| Quality of Service (QoS) | Yes |
| Features | VLAN, QoS |
| Power Source | AC |
Details conventions and notice icons used throughout the guide.
Lists the documents included in the 3WXM documentation set.
Provides information on how to submit feedback and suggestions for the documentation.
Specifies minimum and recommended hardware for the 3WXM client.
Specifies minimum and recommended hardware for 3WXM Services.
Lists supported operating systems and additional required software for 3WXM.
Covers prerequisites like administrative privileges and license keys for 3WXM installation.
Explains the importance of user privileges for software installation and configuration.
Details the process of obtaining and using serial, license, and activation keys for 3WXM.
Information on integrating 3WXM with HP OpenView environments.
Provides guidelines for hardware and memory allocation based on WX switches supported.
Explains standalone and shared modes for installing 3WXM Services.
Provides information on the installation process for 3WXM client and services.
Instructions on how to unpack installation files on Windows systems.
Guide on navigating and using the 3WXM installation wizard.
Information on how 3WXM Services are automatically started after installation.
Steps to connect 3WXM clients to the 3WXM Services.
Details on changing the properties and settings of 3WXM Services.
Explains how to create user accounts with different privilege levels for access control.
Overview of the 3WXM main window and its components.
Describes the four panels within the main 3WXM window.
Guidance on using the menu bar and toolbars for actions in 3WXM.
How to configure network and user interface preferences in 3WXM.
Explains how wizards assist administrators in configuration steps within 3WXM.
Describes how to display a topology view of managed devices and their relationships.
How to use shortcuts for quick access to wizards and editing object properties.
Information on accessing different types of help within the 3WXM application.
Introduces planning and managing wireless networks using 3WXM.
Explains how to determine required wireless services like employee, guest, or VoWIP access.
Describes network plans as workspaces for designing and visualizing wireless networks.
Defines RF coverage area and introduces techniques for RF coverage planning.
Details the RF Auto-Tuning technique for setting MAP channels and power settings.
Explains enhancing RF Auto-Tuning with geographic modelling information.
Describes RF Planning technique for detailed network plans and visualization benefits.
Provides guidelines to help determine the appropriate RF planning technique for an organization.
Overview of 3Com network configuration areas in 3WXM.
Focuses on radio and AAA configuration for delivering virtual wireless services.
Explains how to control user access using authentication, authorization, and accounting.
Details methods for determining user access rights to the network.
Describes providing users with specific network rights via attribute-value pairs.
Explains collecting and sending information for billing, auditing, and reporting.
Information on configuring Mobility Domains and WX switches.
Steps to configure basic properties like name, model, and location for WX switches.
Details on supplying connection information for managed WX switches.
Selecting software image and configuration files for WX switch resets.
Provides steps for physically installing WX switches and MAPs.
Explains the process of sending WX configuration information to WX switches.
Overview of management and monitoring tools available in 3WXM.
Displays summary status of devices in the network at mobility domain, switch, or MAP level.
Provides current and historical information about radio health and activity.
Information about clients using the network, including activity and location.
Explains how to detect and manage unauthorized access points (rogue APs).
Details the system's event logging interface and filtering capabilities.
Describes configuration and network verification rules for identifying inconsistencies.
How to generate reports from monitoring and configuration data in 3WXM.
Importing RF measurement data to improve the accuracy of the RF model.
Introduces configuring wireless services like employee, guest, and VoWIP access.
Provides information on configuring secure, encrypted access for employees.
Lists the tasks required to create a service for employee access.
Summarizes fields and configuration items for setting up employee access.
Detailed steps demonstrating the configuration of employee access services.
Explains how to create a service profile containing configuration for a specific service.
Describes creating radio profiles to apply common settings to multiple radios.
Details on configuring RADIUS server attributes and groups within 3WXM.
How to define network access rules, including 802.1X network access.
Steps for setting up VLANs on WX switches to support wireless users.
Information on configuring clear access for visitors at your location.
Lists the tasks required to create guest access services.
Summarizes fields and configuration items for setting up guest access.
How to configure mobility profiles to limit guest access based on criteria.
Details on using the WX switch's local database for user authentication.
Information on configuring Voice over Wireless IP (VoWIP) services.
Lists the tasks required to create VoWIP access services.
Summarizes fields and configuration items for setting up VoWIP access.
Details on configuring local authentication for VoWIP users.
How to control access using security access control lists (ACLs).
Illustrates defining an ACL for SpectraLink wireless phones.
Illustrates defining an ACL for Avaya wireless phones.
Introduces RF Auto-Tuning as a quick method for configuring RF networks.
Guidance on unpacking and physically installing WX switches and MAPs.
Steps to prepare a WX switch for configuration using CLI or Web Quick Start.
Process to retrieve and upload WX switch configuration into a 3WXM network plan.
Explains how to create a service profile containing configuration for a specific service.
Steps to create a radio profile and map a service profile to it.
Instructions for creating direct connect and distributed MAPs in 3WXM.
How to apply a radio profile to each radio on a MAP.
References for further tasks after configuring the RF environment.
Introduces RF Auto-Tuning with modelling for network configuration.
Steps to add site information, including buildings and floors, to improve monitoring.
How to add major RF obstacles like walls and barriers to the floor plan.
Procedure to create RF coverage areas, including wiring closets and areas.
Steps to add the location of a wiring closet to the floor plan.
Procedure to create RF coverage areas, including wiring closets and areas.
Instructions on adding direct and distributed MAPs to your network.
How to associate distributed and direct MAPs to a coverage area on the floor.
References to using RF Planning and managing/monitoring the network.
Introduces RF Planning for detailed site information and finer RF coverage configuration.
Guidance on cleaning up AutoCAD files before importing into 3WXM.
Process to define site, building, and floor information for network plans.
Steps to import existing floor plans into 3WXM from various file formats.
How to set the scale on a floor plan to define distances between network objects.
Procedure to clean up floor drawings by removing unnecessary objects.
How to model RF obstacles and assign types and attenuation factors.
Importing RF measurement data from a site survey done outside of 3WXM.
Tasks involved in defining RF coverage areas for network planning.
Steps to add wiring closet locations to the floor plan for switches.
Procedure to define RF coverage areas graphically on the floor plan.
Automatically calculates required MAPs and places them on the floor.
Procedure to determine and place additional MAPs in the network.
Steps to add new MAPs to the network plan after computing and placing them.
How to assign channels to MAP access points to minimize co-channel interference.
Calculates optimal transmit power for MAPs to ensure adequate coverage.
How to view RF coverage to ensure areas are adequately covered by MAPs.
Generating a work order for physical installation of 3Com Mobility System.
Information on distributing work orders and installing 3Com equipment.
References for optimizing RF coverage and managing the network.
Introduces deploying services, enabling communication, and configuring monitoring.
Steps to send and deploy network plan configurations to WX switches.
Information on performing basic administrative tasks within 3WXM.
Details on configuring system information, HTTPS, Telnet, SSH, and SNMP.
How to update WX system images and configuration files.
Managing WX system images by adding or deleting them from the repository.
How to distribute system images to one or more WX switches.
Downloading WX configuration files to one or more WX switches.
How to save multiple versions of a network plan for configuration snapshots.
Managing switch configuration files via import and export operations.
Describes how to use monitoring tools to diagnose network problems.
Steps to identify problems reported by an individual user.
How to find users based on username, MAC address, IP address, or VLAN name.
How to place a user on a watch list to gather statistics over time.
How to display a user's current location on the floor plan.
How to display event types and user activity, including location history.
How to view user activity statistics for up to the next 30 days.
How to monitor RF statistics for a group of users experiencing performance issues.
Information on identifying and locating unauthorized access points (rogues).
How to enable countermeasures against rogue devices on individual radio profiles.
Introduces post-deployment optimization using RF measurement data.
Applying RF measurements derived from MAPs to optimize the floor's RF model.
Using RF measurements from an Ekahau Site Survey for network optimization.
Creating a site survey work order with MAP locations and floor JPEG images.
Importing CSV site survey data into 3WXM to correct attenuation factors.
Rebuilding a floor's attenuation library using RF measurements.
Methods for locating and fixing wireless coverage holes in the network.
How to view RF coverage based on corrected attenuation data.
Preventing 3WXM from redistributing MAPs by locking them down.
Methods to fix wireless coverage holes using Compute and Place or installing new MAPs.
Procedure to determine the number and placement of additional MAPs.
Steps to add new MAPs to the network plan after computing and placing them.
References for creating backup copies and performing administrative tasks.
To Next Page