176 CHAPTER 8: OPTIMIZING A NETWORK PLAN
Importing RF
Measurements from
the Ekahau Site
Survey
After you complete the site survey, you import the csv file containing the
RF measurements from the Ekahau Site Survey tool into your network
plan. After you import your RF measurements, you optimize to correct
attenuation for obstacles on the floor.
To import RF measurements:
1 Access the Building wizard. Expand the Sites section of the Organizer
panel to the building or floor you want to view. Right-click on the
building or floor and select Edit.
The Modify Building wizard is displayed.
2 Click Optimize RF Coverage at the top of the wizard. The Optimize RF
Coverage page appears.
To Next Page
Loading...
