Generate a Work Order 141
Generate a Work
Order
You can generate a work order as part of your wireless network
planning. The work order provides all of the necessary information for the
physical installation of the 3Com Mobility System. A work order shows
where the MAP access points should be installed, WX initial setup
configuration information, and projected RSSI information that is useful
when verifying the installation.
To generate a work order:
1 The Organizer panel is displayed on the left. Expand Sites, right-click on a
building, and select Edit.
The Modify Building wizard is displayed.
2 Select the Report tab.
3 In the Work Order Options group box, specify the work order options.
4 In the Language list, select English or German.
To Next Page
Loading...
