104 CHAPTER 5: USING RF AUTO-TUNING WITH MODELLING
Insert RF Obstacles Add major RF obstacles that will affect the placement of your MAPs, such
as solid walls, barriers, or elevator shafts.
To add RF obstacles:
1 The Organizer panel is displayed on the left. Expand Sites, right-click on a
building, and select Edit.
The Modify Building wizard is displayed.
2 Select a shape under Insert RF Obstacle that most closely matches the
RF obstacle you wish to place.
3 Click and drag the mouse to draw the location and shape of the RF
obstacle on the floor.
The Create RF Obstacle wizard is displayed.
4 Enter a description of the RF obstacle, and select the Obstacle Type.
A default attenuation factor is displayed for the object type, or, you can
select an attenuation factor that you believe more closely matches the
RF obstacle.
5 Click Finish. The RF obstacle is added to your floor layout.
To Next Page
Loading...
