3Com 3C886 - OfficeConnect 56K LAN Modem Router - TCP;IP Setup for Windows NT 4.0

38 C
HAPTER
4: S
ETTING
U
P
TCP/IP
FOR
W
INDOWS AND
M
ACINTOSH
Figure 21
TCP/IP Properties Advanced Screen
10
Check the box to set TCP/IP as the default protocol.
11
Click
OK
to close the TCP/IP Properties dialog box.
12
Click
OK
to close the Network dialog box.
13
Restart Windows 98 or 95 to let these changes take effect.
TCP/IP Setup Using
Windows NT 4.0
Windows NT 4.0 provides TCP/IP as part of its standard operating system. If you
have not already set up TCP/IP, do the following.
You will need your Windows NT 4.0 installation CD-ROM.
1
From the Control Panel, double click
Network
.
The Network dialog box appears.
2
Select the
Protocols
tab, as shown in Figure 22.