66 C
HAPTER
6: A
DVANCED
C
ONFIGURATION
To change the associations of this particular workstation, do the following.
1
Check or clear the boxes of the service providers you would like to associate or
disassociate.
2
Click
Submit
.
If you wish to password protect the configuration profile of the 56K LAN Modem,
refer to “Locking and Unlocking the Configuration.”
Editing Service
Provider Profiles
The following steps allow you to edit a previously configured service provider
connection.
1
From the 56K LAN Modem main page, click the
Service Providers
image.
A drop-down list box appears which contains the names of your configured
service providers.
2
Select the name of the service provider connection profile you wish to edit.
The connection profile page appears.
3
Edit the fields as desired.
For more information on the particular fields, refer to the appropriate section,
“Setting Up a Connection to an ISP” or “Setting Up a Connection to a Private
Network”, or refer to the online help located in the web page’s bottom frame.
4
When finished, click
Submit
.
Restricting Access to
Service Providers
If you wish to restrict a computer(s) on the LAN from accessing a service
providers(s), do the following.
1
Click
Workstation Parameters
from the 56K LAN Modem home page.
2
Select the workstation for which you wish to limit access.
3
Clear the check boxes located next to the names of the computer(s) from which
you want to restrict service provider access.
4
When finished, click
Submit
.
5
Repeat steps 1 through 4 for additional service provider access restrictions.
If you wish to password protect the configuration profile of the 56K LAN Modem,
refer to “Locking and Unlocking the Configuration.”
To Next Page
Loading...