3Com 3C886 - OfficeConnect 56K LAN Modem Router - TCP;IP Setup for Windows 3.11

42 C
HAPTER
4: S
ETTING
U
P
TCP/IP
FOR
W
INDOWS AND
M
ACINTOSH
Figure 27
TCP/IP Dialog Box for Macintosh Computers
2
Select
Ethernet
from the
Connect via
drop down list box.
3
Most users should select
Using DHCP Server
from the
Configure
drop-down list
box, as most LANs utilize dynamic IP addressing. If this LAN uses static IP
addressing, select
Manually
and then enter the IP address.
TCP/IP Setup Using
Windows 3.11
If you are using Windows 3.11, a TCP/IP stack may not be provided as part of the
operating system. If you do not have a TCP/IP stack, you can use MS_TCP which is
provided on the
3Com Companion Programs
CD-ROM.
Setting up TCP/IP using
MS_TCP
To set up MS_TCP, do the following.
1
Install MS_TCP, located on the
3Com Companion Programs
CD-ROM, onto your
hard drive.
2
From the Program manager, click
Network
.
Figure 28
Program Manager Group Box
3
From the Network group box, click
Network Setup
.