3Com 3C886 - OfficeConnect 56K LAN Modem Router - Page 43

TCP/IP Setup Using Windows 3.11 43
Figure 29
Network Group Box
4 From the Network Setup dialog box, click the
Drivers
button.
Figure 30
Network Setup Dialog Box
5 From the Network Drivers dialog box, click
Add Protocol
.
6 Select
Unlisted or Update Protocol
and then click
OK
.
7 From the Install Driver dialog box, enter the path to the MS _TCP directory.
For example, if you installed MS_TCP on your C: drive in a directory called
MS_TCP, you would enter C:\MS_TCP.
8 Select
MS TCP/IP-32.X
and then click
OK
to install.
9 After the installation is complete, click
Close
.
10 Click
OK
.
11 From the MS TCP/IP Configuration dialog box, check the
Auto Configuration
check box and then click
OK
.
12 Restart your PC to allow the changes to take effect.