26 CHAPTER 1: INTRODUCING THE SUPERSTACK 4 SWITCH 5500 FAMILY
Default Settings Tabl e 6 shows the default settings for the Switch 5500 Family. If you
initialize one of the Switch units, it is returned to these defaults.
Table 6 Default Settings
Feature Switch 5500 Family
Port Status Enabled
Port Speed Auto-negotiated
Duplex Mode Auto-negotiated
Power over Ethernet Enabled on the Switch 5500G-EI (when a PoE
PSU is installed)
Flow Control Auto-negotiated
Broadcast Storm Control Enabled
Virtual LANs (VLANs) All ports belong to the untagged Default VLAN
(VLAN 1) with IEEE Std 802.1Q-1998 learning
operational.
Management VLAN VLAN 1
Multicast Filtering IGMP filtering enabled
Rapid Spanning Tree Protocol Enabled
Fast Start Enabled
RMON Alarm Enabled
Link Aggregation Control
Protocol (LACP)
Disabled per port
Spanning Tree Protocol Enabled
Smart Auto-sensing Enabled
To Next Page
Loading...
