3Com 4200G PWR - Page 29

3Com Switch 4200G Family 29
Command Reference
public-key-code end
Use the public-key-code end command to return from public key edit view to public key view and save the
public keys you set.
Public Key Edit view
public-key-code end
Use the public-key-code end command to return from public key edit view to public key view and save the
public keys you set.
Public Key Edit view
put
Use the put command to upload a local file to the remote SFTP server.
SFTP Client view
put
Use the put command to upload a local file to the remote FTP server.
FTP Client view
pwd
Use the pwd command to display the current directory on the SFTP server.
SFTP Client view
pwd
Use the pwd command to display the current path. If the current path is not configured, an error occurs when
you execute this command.
User view
pwd
Use the pwd command to display the current directory on the remote FTP Server.
FTP Client view
qos cos-drop-precedence-map
Use the qos cos-drop-precedence-map command to configure the "COS->Drop-precedence" mapping
relationship.
System view
qos cos-dscp-map
Use the qos cos-dscp-map command to configure the "COS->DSCP" mapping relationship.
System view
qos cos-local-precedence-map
Use the qos cos-local-precedence-map command to configure the "COS->Local-precedence" mapping
relationship.
System view
qos dscp-cos-map
Use the qos dscp-cos-map command to configure the "COS->802.1p priority" mapping relationship.
System view
qos dscp-drop-precedence-map
Use the qos dscp-drop-precedence-map command to configure the "DSCP->Drop-precedence" mapping
relationship.
System view
qos dscp-dscp-map
Use the qos dscp-dscp-map command to configure the "DSCP->DSCP" mapping relationship.
System view
qos dscp-local-precedence-map
Use the qos dscp-local-precedence-map command to configure the "DSCP->Local-precedence"
mapping relationship.
System view
qos-profile
Use the qos-profile command to create a QoS profile and enter the corresponding view.
System view
qos-profile port-based
Use the qos-profile port-based command to configure the port-based application mode of QoS profiles
on ports.
Ethernet Port view
queue-scheduler
Use the queue-scheduler command to set the queue-scheduling algorithm and parameters.
System view