102 CHAPTER 6: UPGRADING SOFTWARE
3 Select option 2 to set the baud rate to 19200.
You will also need to change the baudrate on Hyperterminal to 19200
bps and select XModem protocol.
If supported, you can select Option 5 to increase the speed of the
download.
4 Press Enter to start the download. The following information is displayed:
Now please start transfer file with XMODEM protocol
If you want to exit, Press <Ctrl+X>
Loading
...CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
5 As the file is downloading, start the XModem send file process with
terminal emulation software, such as Microsoft Hyperterminal.
When the download is complete, the following information is displayed:
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCdone!
Bootrom updating.........done!
To Next Page
Loading...
