Bootrom Upgrade 99
If supported, you can select Option 5 to increase the speed of the
download.
4 Press Enter to start the download. The following information is displayed:
Now please start transfer file with XMODEM protocol
If you want to exit, Press <Ctrl+X>
Loading...CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
5 As the file is downloading, start the XModem send file process with
terminal emulation software, such as Microsoft Hyperterminal.
When the download is complete, the following information is displayed:
Please input the file attribute (main/backup/none):none
done!
6 Repeat steps 1 to 5 for each of the remaining files.
Bootrom Upgrade This section describes how to indicate which file the switch is to boot
from once the software has been loaded.
1 From the Boot menu, select option 2 to display the following:
Select application file to boot:
1. set application file to boot
2. set configuration files
3. set web files
0. return
Enter your choice (0-3):
2 Select option 2 to display a file list similar to the following:
Boot menu choice: 2
Free Space: 10491904 bytes
The current application file is s4b03_01_04s56.app
(*)-with main attribute;(b)-with backup attribute
(*b)-with both main and backup attribute
Please input the file number to change:
An asterisk (*) indicates the current main boot file.
File Number File Size (bytes) File Name
====================================================
1(*) 4649088 s4b03_01_04s56.app
To Next Page
Loading...
