3Com 5500G - ACSEI Client Configuration on Linux System; Installing ACSEI Client

BIOS Menu 25
5 Understanding and Using
the BIOS Options
BIOS Menu
Entering the BIOS
Menu
When the OSN|M is powered on, the following information is displayed:
*************************************************
**
* BIOS , Ver 1.17 *
**
*************************************************
Copyright(c) 2005-2007 by 3Com Corporation.
Compiled date: Nov 22 2007 13:47:17
CPU type : Intel(R) Celeron(R) M processor
CPU L1 Cache : 32KB
CPU L2 Cache : 512KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2
Memory Size : 512MB
Memory Speed : 400MHz
BIOS Size : 1024KB
Hard Disk Size : 80GB
HardWare Version is 1.00
Press CTRL-D in 5 seconds to enter BIOS Menu...
To enter the BIOS menu, press Ctrl+D when Press Ctrl-D to enter
BIOS Menu...
appears.
If you are logged into the OSN|M’s Linux system, you can execute the
reboot command to reboot the OSN|M, and then press Ctrl+D when
Press Ctrl-D to enter BIOS Menu... appears to enter the BIOS
menu.
[root@localhost ~]# reboot
If the Linux system is shut down, the following information is displayed:
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal