2
AP Features
Feature Description
Ethernet Port The Ethernet port provides a 10/100/1000 BASE-T Ethernet connection
to a switch. Use a suitable Category 5 cable with straight-through
wiring and standard RJ-45 connectors to connect your AP to the
network.
LEDs The LEDs indicate power and activity. See “Checking the LED
Indicators” on page 8 for details.
Antenna Connectors The AP has three built-in internal antennas. In addition, three RSMA
antenna connectors allow you to connect optional external antennas.
Reset Button To restore factory settings, during power-up, press the Reset button and
hold it for 5 or more seconds.
RJ-45 Console Port Provides a serial interface to the AP for diagnostic use. Default: 115.2K
speed, 8 bits, no parity, 1 stop bit.
Wall-Mounting Bracket
and Table-Top Stand
The combined wall-mounting bracket and table-top stand allows you to
mount the unit on a wall or stand it on a table top.
To Next Page
Loading...
