3.4. ADJUSTING AND MAINTENANCE
For all adjustments and maintenance to the machine, make sure to turn
the machine off and remove the power cable.
3.4.1. INSTALLING AND REMOVING THE HOPPER
Removing the hopper is useful in the following situation:
Circular parts or waste with big diameters for example, are difficult to
be grabbed by the shredder teeth. On the contrary, extremely flat
objects can lay still on the shredder stator knife after the shredder
took a bite out of it.
When the shredder is not powerful enough to shred a solid chunk of
waste, the machine will deactivate. After reversing the rotational
direction of the shredder followed by removing the hopper, the part
can be removed from the machine.
The hopper can be installed and removed really easy.
Step 1. To install the hopper, push the Hopper locking lever down and
slide the hopper.
To Next Page
Loading...