2. Hopper
The hopper prevents the user from getting in contact with the
shredder blades and prevents plastic waste from escaping the
machine.
3. Hopper locking lever
The Hopper locking lever allows the user to assemble and
disassemble the hopper safe and easy. The Hopper locking lever is a
safety system for both holding the hopper in place and preventing the
user from entering his/her hands in a running shredder. This way, the
machine can only be used, if the hopper is placed correctly.
4. Granulator compartment
Plastic chunks inside of the granulator compartment are being cut
until the granules are small enough to fit through the holes in the filter
screen.
5. Shredder compartment latch
Pushing this latch allows the user to unlock the shredder
compartment and lift it open.
Never use the latch when the Filter screen is not installed.
6. Granulate collector
The granulate collector is placed below the Filter screen and collects
all the granulate coming from the granulator compartment. Open the
interlock guard and pull the granulate collector out to store your
granulate.
To Next Page
Loading...