THERMOSALD ISC – MAINTENANCE & OPERATIONS MANUAL Rev. 2010 / 03
(Includes all previous models)
Manuale cod.: 3ES080x_V5.1_MU_EN Page Nr. 12 Tot. Nr . 47
3 INSTALLATION
3.1 – ANALYSIS OF APPLICATION
BEFORE BEGINNING THE FIRST INSTALLATION, READ CAREFULLY THE
WARNINGS AT CHAPTER 0 AND PARTICULARLY THE SAFETY PRECUTIONS AT
CHAPTER 0.1 AND COMPLIANCE WITH ELECTRO-MAGNETICS STANDARDS AT
CHAPTER 0.2.
IT IS ENOUGH FOLLOW STEP TO STEP THE FOLLOWING INSTRUCTIONS TO START
UP THERMOREGULATOR WELL; FOR ANY QUESTIONS DON’T EXITATE TO
CONTACT OUR TECHNICAL OFFICE.
• WHICH BAND CAN USE TO HAVE THE MAXIMUM?
If You like You can contact our technical office to choise band
Material:
• Original bands by 3E in special alloy Good
• NiCr80/20 No good
• Altro: Contact our technical office
Profile:
• Chamfered (tapered edge) …………………….
• Flat …………………….
• Concave (grooved) …………………….
• Double …………………….
• Beaded …………………….
• T-Shape …………………….
• Cutting wire …………………….
• Endless steel bands …………………….
• Other …………………….
Geometrical Dimensions:
• Width: LARG= ……………………. [mm]
• Thickness: SP= ……………………. [mm]
• Length : L-TOT= ……………………. [mm]
• Copper/Silver Ends: L-RAM= ……………………. [2 x mm]
• Copper/Silver in the center: L-RAMC= ……………………. [mm]
• Teflon in the center: L-TEFL= ……………………. [mm]
• Other: …………………….
To Next Page
Loading...
Need help?
General