THERMOSALD ISC – MAINTENANCE & OPERATIONS MANUAL Rev. 2010 / 03
(Includes all previous models)
Manuale cod.: 3ES080x_V5.1_MU_EN Page Nr. 38 Tot. Nr . 47
• CONFIGURATION PANEL = 2
The thermoregulator is designed for 5 type of functions:
0 = function only with potentiometers (at first start up)
1 = function with potentiometers and display: the temperature set on display in pre-heat and seal is the maximum value,
with potentiometers can decrease (also with analog input).
2 = function only with display.
3 = predisposed for CAN BUS
4 = predisposed for PROFIBUS
• CONFIGURATION (SERIAL INTERFACE) = SERIAL 485 OFF
Thermoregulator can exchange data with supervisor by RS485 interface.
• SERIAL ADDRESS RS485 = 0
Unit address for serial interface RS485; value admitted 0-15
To Next Page
Loading...
Need help?
General