3M™ Overhead Projector 1800 Illustrated Parts Breakdown
© 3M 2004 33
Section 22. Hardware Kit
Hardware Kit 78-8120-8523-7
Description of Parts Included in Kit Qty. Description of Parts Included in Kit Qty.
Screw, Plastite, 4-20 x 1/4, Bzn 4 Bushing, 0.50 Mounting Hole Dia. 1
Screw, Taptite, Pan Head, M3.5 x 8, Bzn 8 Washer, Plain, #8 6
Screw, Plastite, 6-19 x 5/16 Long, Zinc 6 Screw, Plastite, 8-16 x 3/8 Long, Bzn 4
Screw, Taptite, M3 x 12, Zinc 2 Screw, Plastite, 4-20 x 3/8 Long, Bzn 5
Spring, Tension 3 Washer, Spring 1
Screw, Taptite, M3.5 x 6 Long, Zinc 10 Screw, Taptite, M4 x 6, Bzn 2
Sleeve, Color Tune 1 Screw, Taptite, M3.5 x 10, Bzn 1
Spring, Compression, #LC-029C-5MW, 18.5 lb. 1 Screw, Plastite, Sems, 8-11 x 5/8 Long 2
Rod, Slide 4 Screw, Plastite, Sems, Hex Washer 4
Rod, Center 1 Nut, Hex, M4, Nylon Locknut, Stl., Zinc 4
Strain Relief 1 Screw, Machine, M4 x 6 Long, Bzn 2
Screw, Plastite, 6-19 x 1 Long, Zinc 1 Retainer, Fresnel 2
Clip, Speed, Knob to Shaft 1 Spring, Cord Wrap 2
Shaft, Color Tune, International 1 Spacer, Switch 2
Screw, Taptite, Sems, M4 x 8, Zinc 4 Spring, Leaf 1
Screw, Post, Latch, Spring 2 Shaft, Pivot Actuator 1
Ring, Push-on, Truarc #511 2 Shaft, Color Tune 1
Screw, Taptite, 10-32 x 5/8 Long, Bzn 4 Screw, Machine, M4 x 0.7 x 12 Long, Zinc 2
Spring, Compression, #LC-020C-4MW 1 Screw, Machine, M4 x 0.7 x 30 Long, Zinc 2
Screw, Taptite, M3 x 10, Zinc 2 Screw, Taptite, Pan Head, M3 x 20 PN, Zinc 4
Screw, Type BT, 8-18 x 5/16 Long, Bzn 1 Spring, Compression, 0.30 O.D., 0.032W 1
Screw, Plastite, 6-19 x 3/8 Long, Bzn 12 E-Ring, Retaining 2
Nut 1
To Next Page
Loading...
