3M 562 - Replacement Parts List; How To Order Replacement Parts; Equipment Warranty and Limited Remedy

3M Packaging Systems Division
3M Center, Building 220-8W-01
St. Paul, MN 55144-1000
Scotch is a trademark of 3M,
St. Paul, Minnesota 55144-1000
Litho U.S.A.
© 3M 1998 34-7004-7252-4(H38.1)
Replacement Parts List
Ref Part
No. Number Description
1 18-9100-6015-3 3/32 x 7/8 Cotter Pin
2 18-9841-0815-1 No. 8 Internal Lockwasher
3 18-9851-1015-6 No. 10 External Lockwasher
4 18-4603-3003-0 10-24 x 3/8 Lg Binding Hd. Scr.
5 18-1756-3403-1 3/8-24 Elastic Stop Nut
6 18-1708-3403-2 3/8-24 Hex Nut
7 70-7023-1970-1 3/8 Internal Lockwasher
8 70-8105-7710-9 Hammer Shaft Assembly
9 70-8634-8000-3 Hammer Arm Spring
10 70-8261-5810-0 Clevis Arm Assembly
11 70-8108-0710-0 Idler Gear Std Assembly
12 70-8223-6240-9 Ratchet Gear
13 70-8690-8328-0 Bumper
14 70-8223-1010-1 Idler Gear Assembly
15 70-8129-6810-8 Cutter Wheel Hub Assembly
16 70-8612-3201-8 Foot Pad
17 70-8043-8927-1 Frame Assembly
18 70-8121-6420-3 Tape Drum Assembly
19 70-8105-6300-0 Connector Shaft
20 18-9260-6000-7 Spring Pin 3/32 Dia. x 7/8 Lg.
21 70-8105-6740-7 Drum Brake Shaft
22 70-8046-8300-4 Trip Pin Plate
23 70-8261-6510-5 Sealing Arm Assembly
24 70-8105-6422-2 Cutter Shaft Assembly
25 70-8635-5800-6 Torsion Return Spring
26 70-8261-7350-5 Trip Pin Arm Assembly
27 70-8126-1320-9 Buffing Roller Assembly
28 70-8697-6890-6 Spacer
29 70-8601-6170-5 Knife Block
Ref Part
No. Number Description
30 70-8659-3675-4 Spring Washer
31 70-8659-1600-4 Friction Washer
32 70-7023-7780-8 4-40 Nut Light Hex "FLEXLOC"
#21 FA440
33 70-8606-1210-3 Hammer
34 70-8659-4225-7 Thrust Washer 33/64 ID x 3/4 OD
35 70-8635-3000-5 Ratchet Key Spring
36 70-8656-5875-4 Cutter Mount Scr.
37 70-8659-3800-8 Pressure Washer (Rubber)
38 70-8697-6883-1 Washer 26/64 ID x 5/8 OD
39 70-8658-9000-1 Washer 17/64 ID x 9/16 OD
40 70-8658-9100-9 Washer 33/64 ID x 1 OD
41 70-8658-8900-3 Washer with Peg
42 70-8045-6703-3 Cutter Mount
43 70-8652-6800-0 Ratchet Key
44 26-8092-5015-7 Thrust Washer "OILITE" TT 1001-1
45 70-8128-2990-4 Sleeve Assembly
46 70-8261-6630-1 Spring Arm
47 78-8023-2190-7 Drum  Tape
48 78-8023-2613-8 Retainer  Tape
49 78-8052-6293-4 Washer  Friction
50 70-8659-1600-4 Washer  Friction
51 26-1002-4949-4 Screw  Self-Tap, Thd. Forming,
Plastitie Pan Hd. Phillips Dr.
#6-19 x 3/8 Lg.
52 18-1756-3403-1 Nut  Self Lock 3/8-24 NF
53 78-8113-6846-9 Shaft  Drum Brake
54 26-1001-6402-4 Screw  Cap Soc. Hd., 8-32 x 1/2 Lg.
Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE:
3M warrants that its Scotch brand dispensers will be free from defects for ninety (90) days after delivery. If any part is proved to be
defective within the warranty period, then the exclusive remedy and 3Ms and sellers sole obligation shall be, at 3Ms option, to repair or
replace the part, provided the defective parts is returned immediately to 3Ms factory or an authorized service station designated by 3M. A
part will be presumed to have become defective after the warranty period unless the part is received or 3M is notified of the problem no
later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at
its option, will replace the equipment or refund the purchase price.
Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon
breach of warranty, breach of contract, negligence, strict liability or any other legal theory.
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by
authorized officers of 3M and seller.
How To Order Replacement Parts
1. Refer to replacement parts illustration to find part
needed and reference number.
2. Refer to parts list for correct part number.
3. Order by part number, part name, dispenser
catalog number and model number.
4. Replacement parts and part prices available direct
from:
3M/Tape Dispenser Parts
241 Venture Drive
Amery, WI 54001-1325
800/344 9883
FAX # 715/268 8153
5. Machine repair service ship direct to:
Tape Equipment Repair Services
241 Venture Drive
Amery, WI 54001-1325
Minimum billing on parts orders will be $25.00.
Replacement part prices available on request.
$10.00 restocking charge per invoice on returned parts.
3