3M 3M-Matic 700rks User Manual

Instructions and Parts List
Serial No.
For reference, record machine serial number here.
Important
Safeguards
Spare Parts
700rks Type 29800
Adjustable
Case Sealer
with
Taping Heads
"3M-Matic" and "AccuGlide" are Trademarks
of 3M, St. Paul, MN 55144-1000
Printed in U.S.A.
© 3M 2000 44-0009-1927-2(A)
3M Packaging Systems Division
3M Center, Building 220-8W-01
St. Paul, MN 55144-1000
Read "Important Safeguards",
pages 3-6 and also operating
"Warnings", page 18
BEFORE INSTALLING
OR OPERATING THIS
EQUIPMENT.
It is recommended you
immediately order the
spare parts listed on
page 39. These parts
are expected to wear
through normal use
and should be kept on
hand to minimize
production delays.
3
3M-Matic
KEEP THESE INSTRUCTIONS NEAR THIS
EQUIPMENT FOR FUTURE REFERENCE.
AccuGlide II



3M 3M-Matic 700rks Specifications

General

Brand	3M
Model	3M-Matic 700rks
Category	Food Saver
Language	English

Summary

Important Safeguards

Replacement Parts and Service Information

Technical Assistance

Contact details and procedures for seeking technical support for the equipment.

Replacement Parts and Additional Manuals

Guidance on ordering spare parts and obtaining additional user manuals.

Intended Use

Equipment Warranty and Limited Remedy

Specifications

Installation and Set-Up

Receiving And Handling

Procedures for inspecting the machine upon arrival and handling it safely.

Machine Set-Up

Recommendations and steps for preparing the machine for operation.

Operation

Maintenance

Cleaning

Guidelines for cleaning the machine to ensure optimal performance and longevity.

Air Line Filter

Maintenance steps for the air line filter, including cleaning and draining.

Lubrication

Information on lubrication points and recommended lubricants for the machine.

Drive Belt Replacement/Tension Adjustment

Circuit Breaker

Knife Replacement, Taping Head

Adjustments

Drive Belt Tension

Reference to maintenance section for adjusting drive belt tension.

Taping Head Adjustments

Reference to section II for specific adjustments to the taping heads.

Special Set-Up Procedure

Upper Frame Assembly – Operating Range

Adjusting the upper frame assembly to set the operating range for different box heights.

Adjustable Collars

Using adjustable collars to set the upper frame for uniform box heights.

Tape Leg Length

Upper Taping Head Frame – Re-positioning

Outer Column – Re-Positioning

Troubleshooting

Electrical Diagram

Pneumatic Diagram

Spare Parts/Service Information

Options/Accessories

Replacement Parts – Illustrations and Parts Lists

Frame Assemblies