7
1. Power Requirements:
Electrical 115 VAC, 60 Hz, 6.4 A (675 watts)
Pneumatic 85 PSIG [6 bar pressure], 2.5 SCFM
[70 liter/minute @ 2PC, 1.01 bar] maximum at maximum random cycle rate.
A pressure regulator/filter is included.
The machine is equipped with two 1/4 HP gearmotors and comes with an 8 foot [2.4 m] standard neoprene
covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed
above.
2. Operating Rate:
Up to 15 boxes per minute. Actual production rate is dependent on box size, box size mix, and operator
dexterity.
Box drive belt speed is 78 FPM [24 mpm]
IMPORTANT SAFEGUARD
IMPORTANT SAFEGUARD
Specifications
3. Operating Conditions:
Use in dry, relatively clean environments at 5
o
to 40
o
C [40
o
to 105
o
F] with clean, dry boxes.
Note: Machine should not be washed down or subjected to conditions causing moisture condensation on
components.
4. Tape:
Scotch
TM
brand pressure-sensitive film box sealing tapes.
5. Tape Width:
50 mm [2 inches] minimum to 72 mm [3 inches] maximum
6. Tape Roll Diameter:
Up to 405 mm [16 inches] maximum on a 76.2 mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
TM
brand film tapes.)
7. Tape Leg Length Standard:
70 mm ± 6 mm [2-3/4 inches ±1/4 inch]
Tape Leg Length Optional:
50 mm ± 6 mm [2 inches ±1/4 inch] (See "Special Set-Up Procedure Tape Leg Length", page 30.)
8. Box Board:
Style regular slotted containers RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C flute.
To Next Page
Loading...
