3M 562 User Manual

Instructions and Parts List
Description
The S-63 Manual Box Sealer is designed to
seal containers with an "L" shaped clip of tape
of equal leg lengths. The tape application is
made quickly and easily with one pass of the
container across the box sealer top. The S-63
can be operated from the top of or recessed into
the packing counter. It is also recommended for
conveyor mounting.
Specifications
Tape: Most "Scotch" brand pressure-sensitive
cellophane, acetate fibre or film tapes.
Tape Width: 1/4 inch [6 mm] minimum to
5/8 inch [15 mm] maximum.
Tape Roll Diameter: Up to 5-1/2 inch [140 mm]
diameter on a 3 inch [76.2 mm] core.
Tape Lengths Dispensed:
It applies a 1-1/2 inch [38 mm] lg. "L" shaped
clip of tape with equal length legs.
Overall Dimensions: 10-1/2 inch [267 mm] lg. x
7 inch [178 mm] high x 5-1/4 inch [134 mm] wide
Weight: 10-3/4 lbs. [5 kg] unpackaged;
11-3/4 lbs. [5.5 kg] packaged.
Tape Loading/Threading
1. Press tape roll against drum flange and thread
tape as shown in Figure 1.
2. Adhere end of tape to cutter mount grooved
surface.
3. The tape drum is positioned for 1/2 inch wide
tape. Refer to tape alignment adjustment for
other tape widths.
Figure 1
S-63 Manual Box Sealer
Model 562
Scotch
TM

3M 562 Specifications

General

Brand	3M
Model	562
Category	Food Saver
Language	English

Summary

Scotch S-63 Manual Box Sealer

Description

Explains the S-63 Manual Box Sealer's purpose and application.

Specifications

Lists technical details like tape type, width, diameter, dimensions, and weight.

Tape Loading/Threading

Provides step-by-step instructions for loading tape onto the dispenser.

Adjustments

Tape Not Cutting

Steps to adjust or fix tape cutting issues.

Tape Alignment

Instructions for aligning the tape on the cutter mount.

Tape Curling Under Applying Roller

Guidance on increasing tape tension to prevent curling.

Tape Breaking

Instructions on decreasing tape tension to prevent breaking.

Tape Not Sticking to Bottom of Product

Adjustments to ensure tape adheres properly to the product.

Tape Not Flipping Up

Steps to fix tape not flipping up, including cleaning and sanding.

Sealer Arm Not Returning

Procedure to correct sealer arm return issues.

Timing the Mechanism

Timing the Mechanism

Explains the necessity of re-timing the dispenser after part replacement.

Position Sealer Arm and Align Ratchet Gear

Steps for positioning the sealer arm and aligning gears.

Adjust Idler Stud and Replace Locknut

Final steps for adjusting the idler stud and securing the mechanism.

Lubrication

Lubrication

Guidance on lubricating replacement moving parts with specific oils.

Replacement Parts List

How To Order Replacement Parts

Instructions on how to order replacement parts and contact information.

Equipment Warranty and Limited Remedy

Details the warranty period and limitations of liability for the product.