8
Specifications (Continued)
9. Box Weight and Size Capacities:
A. Box Weight, filled 2.3 kg [5 lbs.] minimum, 38.6 kg [85 lbs] maximum contents must support flaps.
B. Box Size: Minimum Maximum
Length 150 mm [6 inches] Unlimited
* Width 175 mm [7 inches] 645 mm [25-1/2 inches]
** Height 120 mm [4-3/4 inches] 645 mm [25-1/2 inches]
* Boxes narrower than 200 mm [8 inches] may require more frequent belt replacement because of limited
contact area.
** Minimum/maximum box height dimensions are with machine at factory setting. To accommodate smaller
or larger boxes, machine upper taping head frame and/or outer column assemblies can be re-positioned as
described in "Special Set-Up Procedure", pages 29 - 33 of this manual. Refer to chart below for box height
range desired and then to illustration indicated for machine adjustments necessary.
Minimum/Maximum Box Height Combinations
Minimum* Maximum Refer to Minimum Maximum Refer to
mm [Inches] mm [Inches] Illustration mm [Inches] mm [Inches] Illustration
120 [4-3/4] 645 [25-1/2] A 280 [11-1/8] 810 [31-7/8] D
175 [6-7/8] 700 [27-5/8] B 275 [10-7/8] 805 [31-5/8] E
230 [9] 755 [29-3/4] C 385 [15-1/8] 910 [35-7/8] F
Note: Shaded area on chart indicates machine setting as shipped from factory.
To Next Page
Loading...
